Add RFID anywhere in your product and read ISO 15693 transponders in no time with this OEM RFID module. With its small form factor of only 30 x 15mm, it can be fitted into almost any product. With the integrated antenna, the read range for a typical ISO 15693 transponder is up to 70mm (depending on the tag size).
Integrating the module into your host system is easy due to the many existing libraries and SDKs, eg. for ANSI-C with examples for Raspberry Pi, Arduino, and RTOS (Zephyr).
Specifications
| Operating Principle | ISO15693 RFID Embedded Module |
| Operating Frequency | 13.56 MHz (worldwide) |
| Antenna Connector | 30 x 50 mm integrated loop antenna |
| Output Power | 200 mA |
| Read Range | up to 70 mm |
| Supported Protocols | ISO15693 incl. all custom commands |
| Connectivity | 3V3 UART (115,200 Baud) |
| Operating Voltage | 5V DC |
| Power Consumption | idle: 15 mA, RF on: max. 120 mA |
| Temperature Range | -20 °C to +70 °C |
| Dimensions | 30 x 50 x 5 mm / 1.2 x 2 x 0.3 inch |
Documents and software
| Download | Version | Size |
|---|---|---|
| Product Brief PDF | N/A | N/A |
| Datasheet RR15 | 2.0 | 1.23 MB |
| Metratec ISO15693 Protocol Guide | 1.1 | 771.49 KB |
| MetraTerm 2 Terminal Program (Windows) | 1.1 | 11.26 MB |
| Firmware Update Tool 4 (Windows) | 1.0 | 11.56 MB |
