If you want to integrate RFID technology into existing devices to check consumables, find counterfeited spare parts in a machine or identify users, you sometimes do not have the space on your PCB for a complete reader. Often you only have a few square inches of available space to place all the RFID functionality you need. For these cases, the Dwarf14 HF RFID Module is just the right product. It uses MIFARE® Classic and MIFARE Ultralight® protocols.
With a size of only 22 x 39 mm, the module sets a new standard for RFID reader miniaturization. Despite its size, the module has a performance comparable to much bigger RFID readers. With the right antenna, you can even get a read range of 80 mm.
With the use of these production-ready SMD modules, you get tested hardware and firmware in an extremely short time to market. If you need a different form factor or new features there is always the possibility for a customized module.
Specifications
| Operating Principle | ISO14443A/Mifare Embedded RFID Module |
| Operating Frequency | 13.56 MHz (worldwide) |
| Antenna Connector | U.Fl, 50 Ohm |
| Output Power | 250 mW |
| Read Range | up to 80 mm |
| Supported Protocols | ISO14443A (ID only), Mifare Classic, Mifare Ultralight |
| Antenna Connector | 5V UART (115,200 Baud) |
| Operating Voltage | 5V DC |
| Power Consumption | idle: 10 mA, RF on: max. 100 mA |
| Inputs/Outputs | 8 x 5 V Input/Output (configurable) |
| Temperature Range | -20 °C to +70 °C |
| Dimensions | 22 x 39 x 5 mm / 0.9 x 1.6 x 0.2 inch |
Documents and software
| Download | Version | Size |
|---|---|---|
| Datasheet Dwarf14 | 1.4 | 311.97 KB |
| 0 bytes | ||
| Metratec Mifare Protocol Guide | 2.3 | 483.75 KB |
