+49 (0)391 2519 06-00  |   sales@metratec.com
 Contact    Impress   German Flag

DwarfG2 XR UHF Mid Range SMD Module

UHF RFID at 868/915 MHz is more and more replacing the classic HF RFID technology at 13.56 MHz due to a high potential read range and cheaper RFID transponders. This trends leadas to the fact that more and more developers have to work with UHF electronics, which is not an easy topic if you haven't studied communication technology. A very simple way to integrate UHF RFID into your device without risk and shortest time-to-market is to use metraTec's DwarfG2 XR UHF SMD module.

The compact module can be soldered directly to your mainboard as an SMD component. If you want to integrate it into a vending machine, label printer or other device with a embedded PC, you can also use a normal wire connector. With only 40 x 42 x 6 mm it fits into any machine with reduced heat developed due to the automatic power save mode. Nonetheless, you will get a read range of up to 2 m with the right antenna and transponder thanks to the 500 mW RF power. Another special feature is the high speed of the firmware, when reading and writing data to a tag (approx 100 ms for a 96bit EPC).

  • Fast Read/Write Operation
  • up to 2 m Read Range
  • Compact Design
FilenameVersionSize
Datasheet DwarfG2 XR UHF Module1.1851 kB
Documentation DwarfG2 XR UHF OEM Module1.4296 kB
Eagle Component Library for all metraTec OEM modules2.010 kB
Firmware DwarfG2 XR3.1591.1 kB
metraTec Firmware Update Tool3.7.13.91 MB
metraTec UHF Protocol Guide2.9992 kB
metraTerm Terminal Programm1.72.14 MB